HERAS Steelhoard provides a temporary hoarding system consisting of a unique set of individual components that are assembled on-site to produce a continuous and seamless hoarding façade. The components can be assembled without the need for drilling, riveting, or screwing them together. As the system is supplied in kit form, it allows heavy-duty parts to be safely installed. The components’ longevity allows the hoarding system to be reused multiple times, enabling the hoarding fence to have a low carbon footprint and to be extremely cost-effective.
Specification can be changed to accommodate your requirements in terms of the height of the sheets, mesh extensions, and barbed wire toppings without changing basic parts.
The components of the hoarding fence can be installed and dismantled rapidly as no drilling, screwing or riveting is required. Any damages are limited to a single part.
The components are compactly stacked on pallets, lowering transportation and storage cost.
The wide range of fencing brackets accommodates all kinds of undulating terrain. The hoarding fence system can be installed in the ground in sockets or erected using ballast blocks on the surface where ground penetration is not permissible or suitable. When installed in the ground, the post centres can be varied to avoid underground services.
To ensure the hoarding fence will not rot or degrade, all parts are galvanised and the infill sheets are powder coated over.
The heavy-duty components with durable surface treatment ensure maximum longevity and enable you to re-use the hoarding system multiple times. Any damages are confined to individual parts that can be replaced cost-effectively. The unique flat-pack design of the component kit allows more equipment per load, lowering the carbon footprint during delivery and collection, as well as lowering transportation and storage costs. All components are a 100% recyclable and can be reprocessed at the end of the system’s life cycle. HERAS Steelhoard temporary fencing is the most sustainable on the market and up to 10 times re-usable.
Download our checklist to see whether Heras Steelhoard is the fencing solution for you.
HERAS Steelhoard’s rigorous testing sets new levels of safety and surpasses the requirements of TWf1220-02 and BS5975:2008+A1:2011. Our testing will cover any site on mainland UK up to the most of Scotland. All Steelhoard installations are carried out nation wide by fully qualified directly employed operatives. The hoarding fence withstands all site-specific wind loading requirements for the UK. The 2.4m high fascia is uninterrupted with posts and fittings concealed increasing security.
The HERAS Steelhoard hoarding fence offers a continuous seamless fascia, free from joints and uninterrupted by posts. It provides a clean, uninterrupted surface ideal for the installation of flat advertising media. The box profile sheets can be detailed to corporate requirements in any RAL or BS colour.
HERAS Steelhoard offers a general site to site service with a storage and maintenance facility available for their clients’ hoarding inventory between projects, nation wide. This service includes an initial survey and report, delivery and installation to the client's requirements. At the end of a project, the hoarding fence is dismantled and removed from the site. The equipment is then cleaned, sorted and stored on one of our 7 locations ready for call off. All our installers are directly employed by Heras and fully trained to the highest industry accreditation.
For more information or advice:
Heras Steelhoard is a quality re-useable temporary hoarding system, the profiled panels are galvanised and polyester coated which ensure they will not rot or degrade.
The system can be installed extremely quickly and was designed to give the appearance of a continuous run. At the same time it easily accommodates changes in direction and elevation.
Toughness and durability are the key elements of the system making it the strongest on the market with a 25-year design life. The system has been designed to be stored compactly giving it the lowest carbon footprint when transported. The combination of these factors means it’s not only the most sustainable but when considering the lifespan of the product makes it the most cost effective as well.
Steelhoard is the original steel hoarding system and forms a 2.4m high continuous smart fascia system and is manufactured from ultra-heavy-duty materials giving it a design life of 25 years. High quality galvanized coatings allow us to offer a class leading 10-year guarantee on the non-mechanical components and 5 years on the couplers and brackets. The system is complemented with a wide range of ancillaries including vehicle and pedestrian gates.
For more information about our Heras Steelhoard you can download the brochure here.
As specialists we can calculate wind resistance for specific sites: